Single chip 1/3" format video camera 310 TV line resolution Composite NTSC/PAL video output On-chip auto exposure Automatic gain control Auto white balance 7 VDC-12 VDC Ultra miniature module fits into lens holder

The V-XA095 is a highly integrated CMOS color video camera. It outputs composite video which can directly interface with a VCR / TV monitor or other 75 ohm terminated device. The V-XA095 uses 7-12 VDC and consumes 20mA @ 9 VDC. Other features include: on-chip auto exposure, automatic gain control, and auto white balance. An engineering kit with color camera V-CMOS-EK-96 is also available for OEM applications. All cameras come with wire leads unless otherwise specified. Can use Marshall V-PS12 regulated power supply.

This camera is ideal for all types of low cost video applications such as, pattern recognition, highway monitoring of traffic flow, and weather conditions. Also used in consumer applications such as, computer snapshots, infant monitoring, and video telephones. Other applications include security surveillance and color identification in machine vision and robotic applications. Cameras that include a lens mount can use any of Marshall's V-4300 Series miniature lenses. Marshall Electronics can custom design and manufacture the cameras for all types of OEM applications.

NTSC
V-XA095-SM	Color (NTSC)	$89.95	Board only w/o lens or lens holder
V-XA076-SM	B/W (EIA)	$89.95
V-XA095-LH	Color (NTSC)	$99.95	Camera with lens holder and filter only
V-XA076-LH	B/W (EIA)	$99.95
V-XA095-PCB-6.5(3.6)	Color (NTSC)	$125.00	Camera with 3.6mm lens and wire leads, also available with 6.5mm V-XA095 (or 75)-PCB-6.5
V-XA076-PCB-6.5(3.6)	B/W (EIA)	$125.00
V-CMOS-EK-96	Color (NTSC)	$269.00	Engineering Kit which includes camera board, lens mount & 6 lenses: 2.1, 2.9, 3.6, 5.7, 8 & 12 (mm)
PAL
V-XAP95-PCB-6.5(3.6)	Color (PAL)	$125.00	Camera with 3.6mm lens and wire leads, also available with 6.5mm V-XAP95 (or 75)-PCB-6.5
V-XAP76-PCB-3.6	B/W (CCIR)	$125.00

SENSOR BOARD (V-XA095) Camera On A Chip

1 Video (Yellow) 2 Ground (Black) 3 Power (Red) 4 Ground (Black)

SPECIFICATIONS
Imager	CMOS Sensor
Format	1/3"
Array Size	NTSC - 510 × 492 PAL - 628 × 582
Resolution	310 TV Lines
Scanning	2:1 Interlace
Video Output	1 Vp-p, 75 ohm
Auto Shutter	1/60 to 1/15,000 sec.
Image Area (mm)	NTSC - 4.69× 3.54 PAL - 5.78× 4.19
Gamma Correction	0.45 - on/off
S/N Ratio	>38dB
Minimum Illumination	Color: 15 lux B&W: 3 lux
Supply Voltage	7-12 VDC
Power Requirements	20mA @ 9 VDC
Operating Temperature	-10°C to 55°C
Humidity Limits	0 - 95% Humidity
Sensor Package	48 Pin LCC